详细描述
The RFFC2072 is a re-configurable frequency conversion device with integrated fractional-N phased locked loop (PLL) synthesizer, voltage controlled oscillator (VCO) and one high linearity mixer. The fractional-N synthesizer takes advantage of an advanced sigma-delta modulator that delivers ultra-fine step sizes and low spurious products. The PLL/VCO engine combined with an external loop filter allows the user to generate local oscillator (LO) signals from 85MHz to 2700MHz. The LO signal is buffered and routed to the integrated RF mixer which is used to up/down-convert frequencies ranging from 30MHz to 2700MHz. The mixer bias current is programmable and can be reduced for applications requiring lower power consumption.
The device can be configured to work as signal sources by bypassing the integrated mixers. Device programming is achieved via a simple 3-wire serial interface. In addition, a unique programming mode allows up to four devices to be controlled from a common serial bus. This eliminates the need for separate chip-select control lines between each device and the host controller. Up to six general purpose outputs are provided, which can be used to access internal signals (e.g. the LOCK signal) or to control front end components. The device operates with a 2.7V to 3.3V power supply. ?
特点
85MHz to 2700MHz LO Frequency Range
Fractional-N Synthesizer with Very Low Spurious Levels
Typical Step Size 1.5Hz
Fully Integrated Low Phase Noise VCO and LO Buffers
Integrated Phase Noise 0.18° rms at 1GHz
High Linearity RF Mixer
30MHz to 2700MHz Mixer Frequency Range
Input IP3 +23dBm
Mixer Bias Adjustable for Low Power Operation
2.7V to 3.3V Power Supply
Low Current Consumption
3- or 4-Wire Serial Interface