The 33903 is a device in the second generation family of System Basis Chips. It combines several features and enhanced module designs. The device works as an advanced power management unit for the MCU and additional integrated circuits such as sensors and CAN transceivers. It has a built-in enhanced high-speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection and fail-safe operation mode. The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches.
Features
-
Voltage regulator for MCU, 5.0 V or 3.3 V, part number selectable, with possibilty of usage external PNP to extend current capability and share power dissipation
-
Voltage, current and temperature protection
-
Extremely low quiescent current in low power modes
-
Fully-protected embedded 5.0 V regulator for the CAN driver
-
Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)
-
Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs, with over-current detection and under-voltage protection
-
MUX (except 33903B3/5) output pin for device internal analog signal monitoring and power supply monitoring
-
Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring.
-
Multiple wake-up sources in low-power modes: CAN or LIN bus, I/O transition, automatic timer, SPI message and VDD over-current detection.
-
ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
-
This product is included in Freescale’s , with assured supply for a minimum of 15 years after launch
框图