The MC13202 is the 2nd generation 2.4 GHz band transceiver designed for wireless sensing and control applications. The MC13202 includes a complete packet modem capable of formatting data into packets with 125 byte payload. It has an over the air data rate of 250 kbps using O-QPSK modulation and Direct Sequence Spread Spectrum (DSSS) coding. It builds on the first generation product by integrating a Transmit/receive switch that lowers the overall component count, size and cost of the solution.
The four wire serial peripheral interface (SPI) allows interface to a variety of processors, providing developers to tailor the solution to meet their needs. Freescale offers a variety of MCU that range from 8 to 32bit that easily connect to the MC13202. The software and processor can be scaled to fit applications ranging from simple point-to-point systems, through complete ZigBee™ networking. The 13202 supports the SMAC software, IEEE 802.15.4 PHY/MAC and 3rd party ZigBee stacks.
Features
-
Power supply range: 2.0 to 3.4 V
-
16 Channels
-
0 dBm (Typical), up to 3.6 dBm maximum output power
-
Buffered Transmit and Receive Data Packets for Simplified Use with Low Cost Microcontrollers
-
Supports 250 kbps O-QPSK Data in 2.0 MHz Channels and Full Spread-Spectrum Encode and Decode (Compatible with IEEE Standard 802.15.4)
-
Three Power Down Modes for Power Conservation:
-
< 1 µA Off Current
-
3.0 µA Typical Hibernate Current
-
40 µA Typical Doze Current
-
RX sensitivity of -92 dBm (Typical) at 1.0% Packet Error Rate
-
Integrated Transmit/receive switch
-
Four internal timer comparators are available to reduce MCU resource requirements
-
Clock output is available for use by MCU
-
Seven General Purpose Input/Output ports (GPIO) are available
-
Operating Temperature Range: -40°C to 85°C
-
Small form factor 5x5mm QFN-32 Package
-
Meets Moisture Sensitivity Level (MSL) 3
-
260° C Peak Reflow temperature
-
RoHS compliant