FAB REQUALIFICATION
The 10XS3412 is one in a family of devices designed for low-voltage automotive lighting applications. Its four low RDS(ON) MOSFETs (dual 10 mOhm/dual 12 mOhm) can control four separate 55/28 W bulbs, and/or Xenon modules, and/or LEDs.
Programming, control and diagnostics are accomplished using a 16-bit SPI interface. Its output with selectable slew rate improves electromagnetic compatibility (EMC) behavior. Additionally, each output has its own parallel input or SPI control for pulse-width modulation (PWM) control. The 10XS3412 allows the user to program via the SPI the fault current trip levels and duration of acceptable lamp inrush. The device has Fail-safe mode to provide functionality of the outputs in case of MCU damage.
This product is undergoing a fab migration and device qualification is not complete. PC samples are available now. For more information contact your local sales office.
Features
-
Four protected 10 mΩ and 12 mΩ high side switches (at 25 °C)
-
Operating voltage range of 6.0 V to 20 V with sleep current < 5.0 μA, extended mode from 4.0 V to 28 V
-
8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability
-
PWM module using external clock or calibratable internal oscillator with programmable outputs delay management
-
Smart over-current shutdown, severe short-circuit, over-temperature protection with time limited autoretry, and Fail-safe mode in case of MCU damage
-
Output OFF or ON open-load detection compliant to bulbs or LEDs and short to battery detection
-
Analog current feedback with selectable ratio and board temperature feedback
-
This product is included in Freescale’s with assured supply for a minimum of 15 years after launch
-
-
-
Advanced Lighting Control
-
High-End Lighting Control
框图