产品分类 > 电容 > 陶瓷电容 > C0603C0G1E050C

可能感兴趣的商品

最近浏览过的商品

pic

C0603C0G1E050C

厂商:
TDK
类别:
陶瓷电容
包装:
Digi-Reel?
封装:
0201 (0603 Metric)
无铅情况/ROHS:
无铅
描述:
CAP CER 5.0PF 25V C0G 0201

我要询价我要收藏

  • 参数
  • 描述
参数 数值
安装类型 Surface Mount, MLCC
工作温度 -55°C ~ 125°C
容差 ±0.25pF
温度系数 C0G, NP0
应用 General Purpose
厚度 0.30mm
额定电压 25V
系列 C
尺寸 0.024" L x 0.012" W (0.60mm x 0.30mm)
特点 Low ESR
电容容量 5.0pF

特点
PFC and PWM Single Chip Solution
Synchronized Operation up to 300kHz
99% Power Factor over 20:1 Load Current Range
Current Mode PWM
Instantaneous Overvoltage Protection
Dedicated Overvoltage Protection (OVP Pin)
Minimal Line Current Dead Zone
Typical 250μA Start-Up Supply Current
Line Switching Noise Filter
Low Quiescent Current: 13mA
Fast 2A Peak Current Gate Drivers
Separate Soft Start Controls

典型应用

描述
描述 The LT?1509 is a complete solution for universal off-line switching power supplies utilizing active power factor correction. The PFC section is identical to the LT1248 PFC controller except the EN/SYNC pin is removed because PFC and PWM are synchronized internally. The current mode PWM section (the LT1508 is the volt-age-mode counterpart) contains all the primary side functions to convert the PFC preregulated high voltage output to an isolated low voltage output. The PWM duty cycle is internally limited to 47% (maximum 50%) to prevent transformer saturation. PWM soft start begins when PFC output reaches the preset voltage. In the event of brief line loss,the PWM will be shut off when the PFC output voltage drops below 73% of the preset value.

请选择文档类型: