特点
Dual N-Channel MOSFET Synchronous Drive
Synchronizable/Programmable Fixed Frequency
Wide V
IN
Range: 3.5V to 36V Operation
5-Bit Digital-to-Analog V
OUT
Selection:
0.925V to 2.00V Range with 50mV/25mV Steps
OPTI-LOOP? Compensation Minimizes C
OUT
±1% Output Voltage Accuracy
Power Good Output Voltage Monitor
Output Overvoltage Crowbar Protection
Internal Current Foldback
Latched Short-Circuit Shutdown Timer with Defeat Option
Forced Continuous Control Pin
Optional Programmable Soft-Start
Remote Output Voltage Sense
Available in 24-Lead SSOP Package
典型应用
![](http://cds.linear.com/images/product/1734_app_1.jpg)
描述
描述 The LTC?1736 is a synchronous step-down switching regulator controller optimized for CPU power. The output voltage is programmed by a 5-bit digital-to-analog converter (DAC) that adjusts the output voltage from 0.925V to 2.00V according to Intel mobile VID specifications. The 0.8V reference is compatible with future microprocessor generations. The operating frequency (synchronizable up to 500kHz) is set by an external capacitor allowing maximum flexibility in optimizing efficiency. The output voltage is monitored by a power good window comparator that indicates when the output is within 7.5% of its programmed value. Protection features include: internal foldback current limiting, output overvoltage crowbar and optional short-circuit shutdown. Soft-start is provided by an external capacitor that can be used to properly sequence supplies. The operating current level is user-programmable via an external current sense resistor. Wide input supply range allows operation from 3.5V to 30V (36V maximum). Pin defeatable Burst Mode? operation provides high efficiency at low load currents. OPTI-LOOP compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values.